Setting A Unit To Central User Management; Using Admin And View To Create A User Account - Honeywell Rapid Eye System Administration Manual

Setting a Unit to Central User Management

Using Admin and View to Create a User Account

Document 800-07769 Rev A
02/11
1. While using Admin to update (or create) a site's definition, click the Change button
next to Local User Management is in effect (see
to confirm setting the site to central user management. After clicking Yes, the
message next to the button changes to Central User Management is
pending.
2. Use View to run a
Maintenance Session
3. Click Update Security. The procedure to update security is shown in
Security on a Multi-Media
Result
The next time that you update the site using the Admin application, the label next to the
Change button reads Central User Management is in effect.
The accounts of users authorized to operate the unit are copied to the unit and replace the
accounts created locally. Operators with accounts that authorize operation of the unit, can
access that unit either offsite using View, or locally using LocalView.
Notification of an Admin and Localview Problem
After a Multi SA has used Admin to select Central user management and View to run a
(as explained above), the LocalView Administrator can select Local
Maintenance Session
user management. The next time that the Multi SA runs a
indicates that there is a discrepancy in the User Management settings. The Multi SA has the
option of setting User Management to Central or of leaving it on Local.
Whether user management is central or local, Admin is used to create accounts for
operating units from a PC running the View application.
1. Using Admin, click the Users tab.
2. To display the Add User dialog box, do one of the following:
• Click on the toolbar.
• Click Add on the Actions menu.
• Press Ctrl+Ins.
3. Enter a name in the User name field (see the example in
asked to use another name if the name you entered is already being used in your
system.
4. Click Save and Close.
Rapid Eye DVR System Administrator Guide
Figure
at the site. Click the Security tab.
Unit, page 141.
Maintenance
9-1). A dialog box appears
Updating
Session, a message
9-2). You will be
Figure
169