Recording Video With Continuous Recording Settings; Enabling The Recording Of A Video Feed; Figure 5-2 Recording Tab With Eight Cameras Recording - Honeywell Rapid Eye System Administration Manual

Video Feed Setup

Recording Video with Continuous Recording Settings

Enabling the Recording of a Video Feed

78
Screen Area: Size of Camera Windows on a PC Monitor
If the resolution settings for a Multi-Media unit take up too much or too little of the PC
monitor's area, adjusting Microsoft Windows' Display Properties for a PC monitor can have
a positive effect. See
Monitor Settings to Customize Windows for a
Making Use of a Maintenance Session
To set up a video feed, continue or start a
Multi-Media site; how to do so is shown on
Figure 5-2 Recording Tab with Eight Cameras Recording
1. Continue or start a
Maintenance
2. On the Recording tab (illustrated in
recording is OFF by default for all cameras, when the unit is new. Cells that are
unavailable indicate that that camera port is not connected to a camera, or that the
camera is disabled.
3. Select the cell in the camera's Record column. A menu appears. Select ON. The
settings for Continuous and Event Recording become available to change.
Maintenance Session
page 61.
Session.
5-2) note that in the Record column,
Figure
PC, page 90.
for the Rapid Eye