Remove Password From All Units; Remove Password From One Of Many Units; Figure 10-4 After Removing A System Password - Honeywell Rapid Eye System Administration Manual

Security for a Multi-Media System
To remove the system
password on Multi-Media
units, delete all of the
asterisks (*) in the
password boxes.

Remove Password from All Units

Remove Password from One of Many Units

186
Figure 10-4 After Removing a System Password
1. Run Admin to access the System Password window. Either:
• Click on the Admin toolbar.
• Click the System Password command in the File menu.
• Press the F8 key.
2. Delete the asterisks from the System Password field.
3. Delete the asterisks from the Confirm Password field. The System Password window
should look like
Figure
4. Click Save and Close.
5. Using View, click
6. Click the Security tab in the Maintenance window.
7. Click Update Security on the Security tab. You have the option of ending the
Maintenance session (see
8. Repeat steps 5 to 7 for each Multi-Media unit in your system.
9. The Multi SA needs to tell site users whose System password has been changed, to
refresh their copy of the Multi-Media database, the next time that they use View. See
Refreshing a Local Database
Caution If the system password is not removed from a unit, that system password
will need to be remembered when another site definition is created for that
unit. The system password is also needed if you delete a site definition by
mistake. See
Adding a Site
You may need to remove a system password from only one unit in your system, when:
• Selling the unit to another organization.
• Sending the unit to Honeywell for repair.
10-4, above.
to start a
Maintenance Session
page 71).
on page 274.
on page 35, and
for a site.
on page 37.
Deleting a Site