Creating An Account In Localview; Updating An Account In Localview - Honeywell Rapid Eye System Administration Manual

Managing User Accounts

Creating an Account in LocalView

Updating an Account in LocalView

172
2. Double-click the name of the account. You can also select the user account and do
one of the following:
• Click on the toolbar.
• Click Update in the Actions menu.
• Press F12.
3. Edit the user account information, as needed.
4. Click Save and Close.
Updating Security Onsite Using a Central Account
If Central User Management is enabled and the operator account will be used to operate
the unit onsite, using LocalView, use View to update security on the unit(s) to which the
account will be granted access. See
1. Using LocalView, click the Configuration tab.
2. Select User Management.
3. Click Add New User.
4. Enter a name in the User Name box. You will be prompted to use another name if the
name entered is already being used.
5. You have the option of adding a password to the account. To do so, enter a password
in the Password box. Enter the password again in the Confirm Password box. Some
characters cannot be used in a password, such as a double-quote ( " ). Nothing
happens if you try to enter an invalid character.
6. You have the option of modifying the account rights. See
on page 173.
Rights to an Account
7. Click Save.
Account for Accessing One Unit
Accounts created using LocalView can only access the Multi-Media unit running LocalView.
Central User Management
When user management is central, accounts cannot be created using LocalView.
1. Using LocalView, click the Configuration tab.
2. Select User Management. Select a user.
Updating Security on a Multi-Media Unit
Granting More or Less
on page 141.