Customizing A Dial-Up Connection To An Alarm Station; Customizing The Dial-Up Connection To An Alarm Station - Honeywell Rapid Eye System Administration Manual

Customizing a Dial-Up Connection to an Alarm Station

Customizing the Dial-Up Connection to an Alarm Station

Document 800-07769 Rev A
02/11
The Multi SA may need to customize the telephone number used to reach a Multi-Media
Alarm Station.
Preparation
An alarm station's telephone number in the site definition is a copy of the number in the
alarm station definition. Before customizing a dial-up connection, consider if the alarm
station definition is correct, as explained in
222, and
Customizing a Dial-Up Connection to an Alarm Station
1. While creating or updating a site, select an alarm station.
2. In the Report Alarms to these Alarm Stations pane, click
Update Station to Call in Case of Alarms dialog box appears.
3. Modify the telephone number so that it is as one would dial it. You have the option of:
• Removing/adding long distance country and area codes, OR
• Entering a prefix and commas, as needed to dial out of a site's exchange.
4. Click Save and Close. The modified telephone number appears in the Connection
Method column in the Report Alarms to these Alarm Stations pane. An asterisk is
added in parenthesis (*) to the entry's display, to indicate customization.
5. Update security for the unit. See
Rapid Eye DVR System Administrator Guide
Dial-Up Connection to an Alarm Station
Updating Security on a Multi-Media Unit
on page
on page 225.
. See 3-18. The
Figure
on page 141.
59