Using An Event Session To Search The Event Log - Honeywell Rapid Eye System Administration Manual

Security for a Multi-Media System

Using an Event Session to Search the Event Log

208
Event Log
A is always logged, to help troubleshoot your system. Use an Event
Multi-Media Unit event
Search session to search the event log.
By default, some events are not set to be logged and no events are set to trigger alarms.
To obtain positive results from an Event session, your organization's Multi SA needs to set
events to be logged or to trigger an alarm. See
an Event to Report an Alarm
1. Using the View application, select a site in the Sites tab.
2. Click on the toolbar to display the Events window.
3. Select events that you want to search for by clicking an event tab and selecting events
(see 10-13, Motion is selected).
Figure
4. Enter a date and time in the From and To fields:
a. Select a part of the time to change (minutes, for example) and either enter a new
value with the keyboard or use
b. Use the date drop-down arrow to open the calendar utility and select a date for
the event search.
5. Click Start to perform the search.
6. Select an item in the Results pane.
7. Click Video, to obtain video from the time of the item. The video playback starts five
seconds before the time of the event.
Note The Start button is unavailable until the dates and times in the From and To
fields are properly set to perform a valid search.
Logging an Event
on page for more information.
205
to change the value.
on page 205, and
Setting