Identifying And Defining A Connection; Figure 11-1 Adding An Alarm Station - Honeywell Rapid Eye System Administration Manual

Identifying and Defining a Connection

Document 800-07769 Rev A
02/11
Figure 11-1 Adding an Alarm Station
Reducing Alarm Station Complexity by Adding Alarm Station Definitions
Adding Alarm Station Definitions
areas, you have the option of creating two (or more) alarm station records to shuttle alarms
to the same PC. Duplication can reduce complexity, especially where customized dial-up
connections are needed. For example, you could have one definition for local sites, and
another for sites in other cities.
Use Descriptive Names
[location name] units or [city name] units (Chicago sites or Illinois sites).
Caution Honeywell recommends that Multi SAs check if their organization allows the
type of connection they plan to use.
For example, your organization may not allow connecting by modem to a
PC on its network if this bypasses a firewall.
Enter either dial-up information, an IP address, or both (as listed in
Connection area of the Add Alarm Station dialog box
compulsory when adding an alarm station.
Rapid Eye DVR System Administrator Guide
For View operators that use sites in many different
To further avoid complexity, use descriptive names such as
11-1) in the
Table
(Figure 11-1). Connection data is
217