Stopping A Site From Reporting To A Specific Alarm Station - Honeywell Rapid Eye System Administration Manual

Multi-Media Alarm Stations

Stopping a Site from Reporting to a Specific Alarm Station

236
Note Before de-listing a Rapid Eye unit from a Multi-Media database, Honeywell
recommends that your Multi SA use the Admin application to remove alarm
stations listed in a site definition. See
Specific Alarm Station
1. Using Admin, select the Sites tab.
2. Double-click the site that you plan to remove. An Update Site dialog box appears.
3. Click in the Report Alarms to these Alarms Stations pane. The Add/Delete
Stations to Call in Case of Alarms dialog box appears, displaying a list of alarm
stations. Stations already assigned to the site are listed the Report Alarms to column.
4. To move alarm stations back to the available Alarm Stations column, either:
• Select one or more station names in the Report Alarms to column, then click the
left-arrow (<).
- or -
• Double-click the stations that you want to move.
5. Click Save and Close. The Update Site dialog box reappears, listing the alarm
stations in the Report Alarms to these Alarm Stations pane.
6. You have the option of ending the site edit. To do so, click Close. The Admin window
reappears, listing your system's sites on the Sites tab.
7. Use the View application to start a
you plan to remove.
8. Click Update Security on the Security tab of the
from the Multi-Media database is copied to the Multi-Media unit. Please wait until
Updated security appears in the Feedback field.
9. Close the
Maintenance
10. Using Admin, remove the site (see
11. Using View, click Refresh.
Stopping a Site from Reporting to a
on page 236.
Maintenance Session
Maintenance
Session.
Deleting a Site
for the Multi-Media unit that
Session. Information
on page 37).