Tamper Detection; Figure 7-12 Tamper Detection Panel On The Video Tab; Table 7-3 Contrasting Motion Detection And Motion Search - Honeywell Rapid Eye System Administration Manual

Tamper Detection

Select Tamper
Detection
Document 800-07769 Rev A
02/11
Table 7-3 Contrasting Motion Detection and Motion Search
Operator (Task)
Detection. Log motion
or warn of motion
during Live Sessions,
in real-time.
Search. Search
recorded video for
motion.
Use of tamper detection is optional. When it is in use, operators obtain an alarm or a log
entry when a camera is blinded, blurred or if there is a scene change. The settings for
tamper detection are made seperately on each camera. Video is not affected by tamper
detection settings.
Figure 7-12 Tamper Detection Panel on the Video Tab
Rapid Eye DVR System Administrator Guide
Motion (Tool)
session, Video
tab, Motion
panel
session
Comments
• This method constantly
checks for motion
• Motion events can be
logged or can trigger alarms
as they occur
• Video feed can be masked
where motion is not a
concern.
• This method searches for
motion after the fact
• Events are all listed for
retrieval of video
• The operator can select
areas of video where they
want to search for motion.
129