Power; Figure 9.30 Power Setup Dialog Box; Figure 9.31 Explanations Of The Power Setup Dialog Box - FLIR ThermaCAM P20 Operator's Manual

DIRE
nnn
Example
9.2.5.3

Power

10392703;2

Figure 9.30 Power Setup dialog box

Figure 9.31 Explanations of the Power Setup dialog box

Label
Auto power off
Display power off
LCD illumination
NOTE: For protective reasons, the LCD will be switched off if the detector temperature exceeds +60 °C
(+149 °F) and the camera will be switched off if the detector temperature exceeds +68 °C (+154.4 °F)
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
The first four letters in the directory name
Counter within directory
IR_ COMP_003.jpg
Value
None
■
10 min
■
None
■
30 sec
■
60 sec
■
Low
■
Medium
■
High
■
9.2 – Menu system
Comments
Move the joystick left/right to
specify the time after which the
camera will be switched off if
it is not used.
Move the joystick left/right to
specify the time after which the
display will be switched off if it
is not used.
Move the joystick left/right to
specify the level of background
illumination of the LCD.
51