Figure 9.11 Temperature Scale Showing An Isotherm Set To Above +62 °C; Figure 9.12 Shortcut Menu For Isotherm; Figure 9.13 Explanations Of The Isotherm Shortcut Menu - FLIR ThermaCAM P20 Operator's Manual

10390903;2
Figure 9.11 Temperature scale showing an isotherm set to above +62 °C
Point to Add isotherm and press the joystick to add an isotherm. An isotherm has
now be added to your image. Press and hold down the joystick for one second
when the isotherm (in the temperature scale) is selected to display a shortcut
menu.
10391203;2

Figure 9.12 Shortcut menu for Isotherm

Figure 9.13 Explanations of the Isotherm shortcut menu

Command
Delete
Exit edit mode
Set as ref temp
Above
Below
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
Explanation
Point to Delete and press the joystick to delete the isotherm.
Point to Exit edit mode and press the joystick to exit the edit
mode.
Point to Set as ref temp and press the joystick to use the isotherm
temperature as the reference temperature.
All pixels with a temperature higher than a set temperature will
be colored with the same preset isotherm color.
All pixels with a temperature lower than a set temperature will
be colored with the same preset isotherm color.
9.2 – Menu system
43