Figure 9.14 Isotherm Dialog Box; Figure 9.15 Explanations Of The Isotherm Dialog Box - FLIR ThermaCAM P20 Operator's Manual

9.2 – Menu system
Command
Interval
Settings
Point to Settings and press the joystick to display an Isotherm settings dialog
box where you can change the settings for the isotherm.
10391303;2

Figure 9.14 Isotherm dialog box

Figure 9.15 Explanations of the Isotherm dialog box

Label
Type
Level
Width
Color
Attribute
Label
44
Explanation
All pixels with a temperature within the set interval will be colored
with the same preset isotherm color.
See below
Value
Interval
■
Above
■
Below
■
User-defined
User-defined
Configuration-dependent
Transparent
■
Solid
■
On
■
Off
■
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
Comments
SEE: For an explanation of
isotherm types, see above.
The temperature level in de-
grees Celsius (°C) or degrees
Fahrenheit (°F).
The width of the isotherm in
degrees Celsius (°C) or degrees
Fahrenheit (°F).
The colors used for the
isotherm.
Selecting Transparent will add
some transparency to an
isotherm color, making it easier
for you to see objects through
the color.
To make the isotherm colors
appear solid, select Solid.
Selecting On will assign a label
to the measurement marker (a
small box with a number).