Camera Info; Factory Default; Figure 9.37 Explanations Of The Local Settings Dialog Box - FLIR ThermaCAM P20 Operator's Manual

9.2 – Menu system

Figure 9.37 Explanations of the Local settings dialog box

Label
Language
Video output
Temp unit
Distance unit
Date format
Time format
9.2.5.7

Camera info

The Camera info dialog box shows information about memory usage, battery
status, serial numbers, software revision etc. No changes can be made.
9.2.5.8

Factory default

Point to Factory default and press the joystick to reset the camera to the factory
settings.
NOTE: The camera will be restarted when you restore factory settings. This will take a few seconds.
54
Value
Configuration-dependent
NOTE: The camera program will be restarted when you change
the language. This will take a few seconds.
NTSC
■
PAL
■
°C
■
°F
■
Feet
■
Meters
■
YYYY-MM-DD
■
YY-MM-DD
■
MM/DD/YY
■
DD/MM/YY
■
24 hour
■
AM/PM
■
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004