Removing The Battery; Figure 6.3 Removing The Battery - FLIR ThermaCAM P20 Operator's Manual

Step
1
2
3
6.6.5.2

Removing the battery

10398603;2

Figure 6.3 Removing the battery

Step
1
2
3
SEE ALSO: For more information about the battery system, see section 10 – Electrical power system
on page 55.
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
Action
Open the lid of the battery compartment by pressing its locking mechanism.
Push the battery into the battery compartment until the battery release spring
locks.
Close the lid of the battery compartment.
Action
Open the lid of the battery compartment by pressing its locking mechanism.
The battery release spring will push out the battery from the battery compart-
ment.
Close the lid of the battery compartment.
6.6 – Working with the camera
17