Usb Driver Installation Procedure For Microsoft Windows 98; Operation; Transferring The Images From The Camera To The Computer - FLIR ThermaCAM P20 Operator's Manual

7.3 – Operation
7.2.3.4

USB Driver Installation Procedure for Microsoft Windows 98

Step
1
2
3
4
5
6
7
8
9
7.3

Operation

7.3.1

Transferring the images from the camera to the computer

ThermaCAM Connect 3 transfer application is started automatically when you
connect the infrared camera using USB or FireWire. If you connect the infrared
camera using serial communication (RS-232), you have to start ThermaCAM Con-
nect 3 transfer application manually. You will find ThermaCAM Connect 3 in the
Start menu.
22
Action
When the system has detected the ThermaCAM, the This wizard searches for
new drivers for: FLIR USB Network Adapter window appears.
Click Next.
The wizard asks: What do you want Windows to do?
Select Search for the best driver for your device.
Click Next.
Clear Floppy disk drives
■
Clear CD-ROM drive
■
Select Specify a location
■
Click Browse and locate folder "C:\Program Files\FLIR Systems\Device
■
drivers"
Click Ok
■
Click Next.
Click Next.
Insert Windows 98 CD-ROM if prompted to do so.
Click Finish.
Reboot your computer if prompted to do so.
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004