Electrical Power System - FLIR ThermaCAM EX320 User Manual

Table of Contents

Advertisement

11

Electrical power system

The camera's electrical power system consists of the following parts:
a removable battery
a power supply
an internal battery charger
The camera may powered either by using the battery, or by using the power supply.
When using the power supply, the battery will – if it's inserted in the battery compart-
ment – automatically be charged. You can still use the camera during charging.
➲ Please note the following:
The camera is shipped with charged batteries. To increase the battery life, the
battery should be fully discharged and charged a couple of times by using the
camera or leaving the camera on, until the camera says Battery low.
The same power supply can be used for both the internal battery charger and the
external battery charger.
10581303;a1
Figure 11.1 Battery and battery compartment
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006
11
79

Advertisement

Table of Contents
loading

Table of Contents