Table of Contents
Advertisement
6
Installing the camera
6.1 Mounting the camera
The camera can be operated installed either on a workbench or mounted on a tripod or
custom mount. A standard photo mount (¼-20 UNC) or 3 × M5 mounting holes on the
camera base as well as 3 × M5 mounting holes on the left side of the camera are
provided.
1. ¼-20 UNC mount.
2. Camera base M5 mounting holes.
3. Camera left side M5 mounting holes.
6.2 Powering the camera
6.2.1 Power supply
The camera is powered through the red power connector (6 in Figure 5.3 Camera back
panel description., page 11) on the back panel. When the 24 V DC power supply pro-
vided with the camera (PN X1159) is connected, the power button (1 in Figure 5.3 Cam-
era back panel description., page 11) blinks slowly, indicating that the camera is
receiving power.
Refer to section 11 Technical data, page 58 for the power supply technical data.
14
#T810207; r. AA/43061/43086; en-US
Advertisement
Table of Contents
