Electrical Power System - FLIR ThermaCAM E4 Operator's Manual

10

Electrical power system

The camera's electrical power system consists of the following parts:
a removable battery
■
a power supply
■
an internal battery charger
■
a stand-alone, external battery charger
■
The camera may powered either by using the battery, or by using the power supply.
When using the power supply, the battery will – if it's inserted in the battery compart-
ment – automatically be charged. You can still use the camera during charging.
➲ Please note the following:
The camera is shipped with charged batteries. To increase the battery life, the
■
battery should be fully discharged and charged a couple of times. You can do this
by using the camera until the battery is fully depleted.
The same power supply can be used for both the internal battery charger and the
■
external battery charger.
42
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004