Changing The Temperature Unit; Changing The Date Format; Changing The Time Format - FLIR ThermaCAM P20 Operator's Manual

6.5 – Changing system settings
Step
4
5
6.5.2

Changing the temperature unit

Step
1
2
3
4
5
6.5.3

Changing the date format

Step
1
2
3
4
5
6.5.4

Changing the time format

Step
1
2
3
4
5
14
Action
Move the joystick left/right to change the language.
Press the joystick to confirm your changes and leave the dialog box.
NOTE: Changing the language will make the camera restart the camera
program. This will take a few seconds.
Action
Press the joystick to display the horizontal menu bar.
Point to Local Settings on the Setup menu and press the joystick.
Move the joystick up/down to select Temp unit.
Move the joystick left/right to change the temperature unit.
Press the joystick to confirm your changes and leave the dialog box.
Action
Press the joystick to display the horizontal menu bar.
Point to Local Settings on the Setup menu and press the joystick.
Move the joystick up/down to select Date format.
Move the joystick left/right to change the date format.
Press the joystick to confirm your changes and leave the dialog box.
Action
Press the joystick to display the horizontal menu bar.
Point to Local Settings on the Setup menu and press the joystick.
Move the joystick up/down to select Time format.
Move the joystick left/right to change the time format.
Press the joystick to confirm your changes and leave the dialog box.
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004