10434603;1
Figure 7.1 Image transfer application
The ThermaCAM Connect 3 transfer application makes it possible to transfer all
images from the camera by clicking on the Transfer button. Below is a more de-
tailed description of the different controls.
Callout
1
2
3
4
5
6
7
7.3.2
Transferring all images from the internal camera memory
When the application starts all images in the internal camera memory (but not
subfolders) are selected for transfer.
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
Explanation
Where the images are copied from in the camera. By default all images in the
internal camera memory will be copied.
Folder on your computer to which the images will be transferred.
Click here to select images you want to transfer.
Click here to browse for a folder on your computer where the transferred images
will be stored.
Click here to transfer images from the infrared camera to your computer.
Click here to close the application.
Click here to open an Options dialog where different options, controlling how
the application operates, can be chosen.
7.3 – Operation
23