FLIR ThermaCAM P20 Operator's Manual page 4

Legal disclaimer
All products manufactured by FLIR Systems AB are warranted against defective materials and workmanship for a period of one (1) year from
the delivery date of the original purchase, provided such products have been under normal storage, use and service, and in accordance with
FLIR Systems AB's instruction.
All products not manufactured by FLIR Systems AB included in systems delivered by FLIR Systems AB to the original purchaser carry the
warranty, if any, of the particular supplier only and FLIR Systems AB has no responsibility whatsoever for such products.
The warranty extends only to the original purchaser and is not transferable. It is not applicable to any product which has been subjected to
misuse, neglect, accident or abnormal conditions of operation. Expendable parts are excluded from the warranty.
In the case of a defect in a product covered by this warranty the product must not be further used in order to prevent additional damage.
The purchaser shall promptly report any defect to FLIR Systems AB or this warranty will not apply.
FLIR Systems AB will, at its option, repair or replace any such defective product free of charge if, upon inspection, it proves to be defective in
material or workmanship and provided that it is returned to FLIR Systems AB within the said one-year period.
FLIR Systems AB has no other obligation or liability for defects than those set forth above.
No other warranty is expressed or implied. FLIR Systems AB specifically disclaims the implied warranties of merchantability and fitness for a
particular purpose.
FLIR Systems AB shall not be liable for any direct, indirect, special, incidental or consequential loss or damage, whether based on contract,
tort or any other legal theory.
Copyright
© FLIR Systems AB, 2003. All rights reserved worldwide. No parts of the software including source code may be reproduced, transmitted,
transcribed or translated into any language or computer language in any form or by any means, electronic, magnetic, optical, manual or
otherwise, without the prior written permission of FLIR Systems AB.
This manual must not, in whole or part, be copied, photocopied, reproduced, translated or transmitted to any electronic medium or machine
readable form without prior consent, in writing, from FLIR Systems AB.
Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Systems AB and/or its subsidiaries.
All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective
owners.
Quality assurance
The Quality Management System under which these products are developed and manufactured has been certified in accordance with the
ISO 9001 standard.
FLIR Systems AB is committed to a policy of continuous development; therefore we reserve the right to make changes and improvements
on any of the products described in this manual without prior notice.
Patents
This product is protected by patents, design patents, patents pending, or design patents pending.
Swedish Pat. No. 518 836; PCT Pat. Pend. No. PCT/SE00/00739; US Pat. Pend. No. 09/576266; EPC Pat. Pend. No. 00925826.0; China Pat. Pend.
No. 00809178.1; Japan Pat. Pend. No. 2000-620406; PCT Pat. Pend. No. PCT/SE01/00983; Swedish Pat. Pend. No. 0101577-5; PCT Pat. Pend.
No. PCT/SE02/00857; Swedish Pat. Pend. No. 0200629-4; PCT Pat. Pend. No. PCT/SE03/00307; Swedish Pat. Des. Pend. No. 75530; US Pat. Des.
Pend. No. 29/166.626; US Pat. Des. Pend. No. 29/166.627; China Pat. Des. No. ZL02331553.9; China Pat. Des. Pend. No. 02331554.7; UK Pat.
Des. No. 3006596; UK Pat. Des. No. 3006597; Japan Pat. Des. Pend. No. 2002-23650; Japan Pat. Des. Pend. No. 2002-23649; Int. Pat. Des. No.
DM/061609.
Postal address
Telephone
Telefax
Web site
E-mail
ii
FLIR Systems AB ■ P. O. Box 3 ■ SE-182 11 Danderyd ■ Sweden
+46 (0)8 753 25 00
+46 (0)8 753 23 64
www.flirthermography.com
sales@flir.se
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004