Camera Status Lcd; Figure 8.5 Camera Status Lcd; Figure 8.6 Camera Status Lcd - Explanations - FLIR ThermaCAM P20 Operator's Manual

8.4

Camera status LCD

The camera status LCD on the left side of the camera displays information about
battery status, communication status, memory status etc.
10346003;2

Figure 8.5 Camera status LCD

Figure 8.6 Camera status LCD – explanations
Callout
1
2
3
4
5
6
7
8
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
Comments
Battery status bar. The frame around the battery status bar is switched on when
a battery is inserted.
All segments switched on = fully charged battery
■
All segments switched off = empty battery or no battery inserted
■
Battery indicator. Switched on if a battery is inserted, flashing if the battery is
being charged internally.
CompactFlash card indicator. Switched on if a CompactFlash card is inserted.
CompactFlash status bar:
All segments switched on = the card is empty
■
All segments switched off = the card is full
■
Not implemented
Not implemented
Communication indicator. Switched on when a communication link is active.
Power indicator:
Both segments switched on when the camera is switched on
■
Both segments switched off when the camera is switched off
■
The outer segment flashing when the camera is in 'deep sleep'
■
8.4 – Camera status LCD
37