System Messages; Status Messages; Warning Messages; Menu System - FLIR ThermaCAM P20 Operator's Manual

9.2 – Menu system
The temperature scale is displayed on the right-hand side of the screen. The scale
shows how the colors are distributed along the various temperatures in the image,
with high temperatures at the upper end and low temperatures at the lower end.
9.1.4

System messages

9.1.4.1

Status messages

Status messages are displayed at the bottom of the screen, or in the top left part
of the screen. Here you will find information about the current status of the camera,
etc.
Figure 9.4 Status messages – a few examples
Message
Frozen
Manual
Restarting
Saving as
9.1.4.2

Warning messages

Warning messages are displayed in the center of the screen. Here you will find
important information about battery status, etc.
Figure 9.5 Critical camera information – a few examples
Message
Battery low
Shutting down
Shutting down in 2 seconds
9.2

Menu system

9.2.1

Navigating in the menu system

Press the joystick to display the horizontal menu bar
■
Press the joystick to confirm selections in menus and dialog boxes
■
Press the C button to exit the menu system
■
Press the C button to cancel selections in menus and dialog boxes
■
Move the joystick up/down to move up/down in menus, submenus and dialog
■
boxes
40
Explanation
Message is displayed when the image is frozen.
Message is displayed when the camera is currently in manual
adjust mode.
Message is displayed when the software is restarted, i.e. after
Factory default.
Message is displayed while an image is being saved.
Explanation
The battery level is below a critical level.
The camera will be switched off immediately.
The camera will be switched off in 2 seconds.
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004