Figure 9.27 Naming Based On Unique Counter - Explanations; Figure 9.28 Naming Based On Current Date - Explanations; Figure 9.29 Naming Based On Current Directory - Explanations - FLIR ThermaCAM P20 Operator's Manual

9.2 – Menu system
Label
Overlay
Figure 9.27 Naming based on unique counter – explanations
Typical syntax: IR_nnnn.jpg
IR
nnnn
Example
Comment
Figure 9.28 Naming based on current date – explanations
Typical syntax: IR_YYMMDD_nnn.jpg
IR
YYMMDD
nnn
Example
Comment
Figure 9.29 Naming based on current directory – explanations
Typical syntax: IR_DIRE_nnn.jpg
IR
50
Value
On
■
Off
■
IR = infrared image
■
Unique counter
IR_0003.jpg
The counter will be reset when exceeding 9999,
or when you point to Factory default on the
Setup menu and press the joystick.
IR = infrared image
■
Current date. The format depends on your set-
tings in the Local settings dialog box.
Counter within directory
IR_020909_001.jpg
The counter will be reset every day.
IR = infrared image
■
Publ. No. 1 557 536 Rev. a35 – ENGLISH (EN) – January 20, 2004
Comments
If On is selected, all on-
■
screen graphics will be
saved together with the im-
age
If Off is selected, only the
■
image (together with any
temperature information)
will be saved
NOTE: The difference between
images saved with or without
on-screen graphics will only be
evident when looking at the
images using a third-party
image viewer.