Table of Contents
Advertisement
74
7. Click File...Save with the following options:
a. Save file as *.rcp for recipes.
b. Save file as *.emi for extended memory files. Note: You must use file names which correspond to the ten
extended memory areas preconfigured in the OIT (ex. em0.emi, em1.emi, ..., em9.emi).
c Save file as *.csv to import file into applications such as Microsoft Excel.
8. Once the file is saved, you can copy the recipe file to your OIT by:
a. Procedure 1-- Downloading the file using the Project Manager:
i. With the computer connected to your OIT, click Transfer...Download.
ii. On the Download dialog box, check the RW enable box, then select the recipe file.
b. Procedure 2 -- Downloading using a SD card or USB Flash Drive:
i. Attach an SD card or USB Flash Drive to your computer.
ii. In Project Manager, click Build Download Data for CF/USB Disk button:
iii. Select the folder to save download data: Enter the SD card or USB Flash drive location.
iv. Check the Recipe (RW) enable box, then select the recipe file.
v. Click the Build button. A folder called 'mt8000' is created on the root directory of your drive.
vi. Remove the SD or USB drive and connect it to your OIT.
Please Note: if you are using more than one USB device, make sure that the USB Flash drive is connected first (this
identifies the USB Flash Drive as USB1).
1010-1007W, Rev 06
Sil ver Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
