Table of Contents
Advertisement
Using EZware-5000
Re boot HMI
Connects to the OIT, checks password and resets the OIT in order to update system files.
Editor Settings
EasyBuilder-5000
Brings up EasyBuilder-5000 editing software for project creation and editing.
Build Down load Data for CF/USB Disk
Data can be downloaded to the Silver Series OITs using both CompactFlash and USB jump drives. The Build
Download Data function builds the data to do this.
To build download data for CompactFlash or USB jump drive:
1. Insert CF card or USB jump drive to OIT.
2. Start Project Manager.
3. Click Build Download Data for CF/USB Disk... The Project Manager dialog appears.
4. Insert CF card or USB jump drive into PC. Note the folder that represents the USB/CF
device.
5. Click Browse... to select the folder that represents the USB/CF device.
6. Check the boxes that will be the sources for your data and browse to the appropriate file for
that source.
7. Click Build.
Easy Converter Application
The EasyConverter application is used to view data log files (*.dtl) and event log files (*.evt) that are created by the
OIT during operation. Data log files are files the OIT creates when capturing data using the Data Sampling object.
Event log files are history files the OIT creates when using the Event Log object. Both files are in binary format to
minimize the amount of file space required.
To view these files with a computer, you must use the EasyConverter application. In addition, EasyConverter can
take a data or event log file and convert it into a CSV (Comma Separated Value) file that can be easily imported into
other applications such as Microsoft Excel. For more information on how to do data logging, see Chapter 12 "Bar
63
1010-1007W, Rev 06
Advertisement
Table of Contents
