Maple Systems Silver Series Installation And Operation Manual page 302

Mis cel la neous Ob jects
To create a Media Player Object:
1. From the Objects menu, click Media Player. Or click the Media Player icon in the Object 2 toolbar. The New
Media Player dialog box appears:
2. Description: provides the OIT programmer with a description about this particular object for future reference.
3. Control Address frame: this feature is used to provide some control features to the media player.
a. Enable: check to enable the Control Address feature. This allows manual control of the Media Player
object using the addresses listed below. If disabled, the Media Player will automatically play the first video
in the designated folder when the screen is displayed.
b. PLC name, Device type, Address: see "General Properties" section at beginning of this chapter.
c. Command: 0 – register used to control the operation of the Media Player. In this example, LW0 is the
command register. The following values will result in the following:
i. Value =0: No operation. Default value.
297
1010-1007W, Rev 06