Table of Contents
Advertisement
Rep re senting Data with Graph ics Ob jects
14. Click OK. The Create Word Lamp Object form closes and the main screen of EasyBuilder
appears with the cursor tied to a rectangular outline of the part you just created at the upper
left corner of the screen. Move the part to the desired location on the window.
15. Once the part is placed onto the window, you can adjust the location of the label inside the
part by clicking once on the label. This will highlight the entire object. Now click on the
label again. Now only the label is highlighted, allowing you to move it without moving the
part. Note: if you double-click (click twice rapidly) then you will not highlight the label but
rather enter the Word Lamp Object's Attribute dialog box.
The Set Word Ob ject
The Set Word Object is used to write a value to a PLC register. The touchscreen object displays the State 0 shape
until pressed. When pressed, it displays the State 1 shape and executes the function that was assigned to it.
To create a Set Word Object
1. From the Objects menu, click Button-Set Word. Or click the Set Word icon in the Part1
toolbar. The New Set Word Object dialog box appears.
2. Use the Description: box to enter a title for the Set Word part. A description is not necessary
but does help you identify the purpose of the part.
3. In the Write address frame, select Device type from the drop down menu, and then specify the
PLC coil or HMI internal memory address.
202
1010-1007W, Rev 06
Advertisement
Table of Contents
