Ezware-5000 Sup Port; Oit Mod Els Sup Ported; Plcs Supported; About Your Doc U Men Ta Tion - Maple Systems Silver Series Installation And Operation Manual

Introduction
Welcome to the Maple Systems' Silver Series Operator Interface Terminals (OITs) from Watlow. Using graphic OITs has
never been easier. This powerful family of graphics operator interface terminals connect to Watlow controllers and other
devices such as programmable logic controllers (PLCs) to provide the human-machine interface in industrial applications.
The Silver Series has several features not found in other graphic OITs. This manual explains the operation of the Silver
Series OITs and how to implement the many available features using the EZware-5000 Configuration Software.
Watlow and Maple Systems have worked together to bring you this product. Please contact Watlow for support, and be sure
to utilize any resources referenced in this manual on the Watlow website (www.watlow.com) and the Maple Systems
Website (www.maplesystems.com).

EZware-5000 Sup port

OIT Mod els Sup ported

For the latest list of Silver Series Models supported by Watlow, please visit the Watlow website at www.watlow.com.

PLCs Supported

For the latest list of PLCs and controllers supported by the Silver Series OITs, please visit our website.

About Your Doc u men ta tion

Maple Systems provides many resources to allow you to get the most out of your Silver Series OIT.
Silver Series Operation Manual (shipped with EZware-5000 as a PDF file) - describes installation, general operation
and features of the Silver Series using EZware-5000 configuration software..
Watlow Silver Operator Interface Terminal Manual Addendum - contains specific instructions and examples on
communicating with and creating interfaces for Watlow controllers.
Controller Information Sheets - important information specific to each supported protocol.
EZware-5000 On-line Help - covers the operation of EZware-5000. Always available by clicking HelpTopics from
the Help menu in EasyBuilder, or press F1 from any dialog.
For more information about these and other training sources, visit the Maple Systems website.

Con ven tions

When using EZware-5000, there are usually several ways to perform a task. For example, if you want to copy a graphics
object, you can:
Click the Copy command on the Edit menu.
Click the Copy button on the Standard toolbar.
Press the CTRL + C keys on your com puter.
Introduction - Welcome
1
1010-1007W, Rev 06