Table of Contents
Advertisement
237
Or click the Option List icon in the Object 1 toolbar. The New Option List Object dialog box appears:
2. Description: see section "General Properties" at the beginning of this chapter.
3. Attribute frame: this is used to determine which type of list box is used, color, and total number of states.
a. Mode: options are List box and Drop-down List. List box is a simple list in which all of the states are
shown. Drop-down List is a menu that opens when you click on it.
b. No. of state: range is 1 to 255. Note: that if the range is larger than the size of the object, a scroll down box
is used.
c. Background: color of the background of the list box.
d. Selection: color of the 'selected' or active state.
4. Control address frame: use to select the target PLC register. For more information on each field, see General
Properties section at the beginning of this chapter.
a. Write when button is released: if unchecked, the predefined constant value is written to the target PLC
register immediately after the state has been selected. If checked, the value is not written until the operator
removes his finger from the touchscreen.
Mapping tab: used to configure the text labels and constant values assigned to each State.
1010-1007W, Rev 06
Sil ver Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
