Table of Contents
Advertisement
Mis cel la neous Ob jects
The Prohibit Tab
Prohibit tab: The prohibit tab is used to enable the 'Prohibit' feature or to enable an output sound if external
speakers are used:
1. Prohibit frame: used to enable the 'Prohibit' feature. This feature checks to see if an assigned bit is set or ON
before performing the scheduler function at the preset time. If the bit is ON, the scheduler function is not
performed.
a. Use prohibition function: check to enable the Prohibit feature.
b. PLC name, etc: see "General Properties" section at beginning of this chapter.
2. Sound frame: If external speakers are connected, you can enable this feature to output an audio sound wave
whenever the scheduler function is performed by the OIT.
295
1010-1007W, Rev 06
Advertisement
Table of Contents
