Table of Contents
Advertisement
153
15. Click OK. The Shape Library dialog box appears with the shape stored in the library under
State 1.
16. Click Close to return to the main screen of EasyBuilder.
17. From the File menu, click Save to save the shape to the library.
To delete a shape from a library
1. From the Library menu, click Shape, then Call up library.
2. Select the library that the shape is located in.
3. Click on the shape that you wish to delete from the library.
4. Click Delete. The shape is removed from the library.
5. Click Close to go back to the main screen of EasyBuilder.
6. Save the project file to permanently save changes made to the library. Caution – once project
is saved, the shape is permanently deleted from the library and cannot be replaced.
Finally, you may want to use all or parts of an existing shape to create a new one. To do this, you must first 'place'
the shape onto the work area of EasyBuilder for editing.
To place a shape on the work area
1. From the Library menu, click Shape, then Call up library.
2. Select the library in which the shape is located. For this example, select button1.
3. Click on the shape that you want to place on the work area. For this example, select button
number 12.
4. Click Place... The main screen of EasyBuilder reappears with the shape in the upper-left
corner of the work area.
5. For this example, move the shape to the middle of the work area, as shown.
1010-1007W, Rev 06
When adding new shapes to existing libraries that come with the EZware-5000
software, remember that any future upgrade that you receive from Maple Systems may
overwrite existing libraries during installation. This will delete any new shapes that
you have entered. Therefore, we recommend that you create new libraries to store
these shapes or make backup files of the libraries before installing new upgrades.
Sil ver Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
