Table of Contents
Advertisement
Cre ating Graphic Ob jects
2. Click the Shape library... button. The Shape Library dialog box appears.
3. Choose one of the available libraries in the Library: section.
4. Use the scroll bar to view available shapes. Click on the shape that you want.
5. Click OK The New Shape Object dialog box reappears. The shape that you selected will be
displayed in this dialog box.
6. Click OK. The main screen of EasyBuilder reappears with an outline of the shape object in
the upper left corner of the work area.
7. Move the shape to the location desired and click. The shape appears with small square boxes
around the perimeter of the shape.
8. The shape can be resized or you can edit the shape's parameters by double-clicking to enter
the Shape Object's Properties dialog box, or by dragging on the resizing handles on the
corners of the object.
Using a Pre de fined Picture
You can select from many pictures that are included in the EasyBuilder configuration software. Pictures can be
used for active or passive objects. The following procedure describes using a passive picture object.
148
1010-1007W, Rev 06
Advertisement
Table of Contents
