105
Auto Resizing Using the Model Tab
This tab can also be used to auto resize your project. The project and all objects and graphics will be automatically
proportionately resized.
To auto resize your project using the Model tab in the System Parameters dialog:
1. In the Model tab, select a different display size from the HMI model drop-down box and click OK.
2. If the new display is smaller than the existing display, the project will automatically resize. If the new
display size is larger then the existing display, the Resize Popup Windows/ Objects dialog appears.
3. Check Resize pop-up windows and Resize objects, and then click OK. The project will automatically
resize.
Sil ver Se ries In stal la tion & Op er a tion Man ual
1010-1007W, Rev 06