Table of Contents
Advertisement
159
To add a new group to a library
1. Highlight the group object by clicking the mouse and dragging a rectangular outline so that it
covers the entire group. When you are done, you should see small black squares around the
perimeter of the group. For this example, the scale meter shown at the beginning of this
section is highlighted.
2. From the Library menu click Group, then Save to library. Or click the Save to Group
Library icon in the Standard toolbar. The Save to Library dialog box appears.
3. Click the Group library: box and select the library you wish to store the group in, (for this
example meters).
4. Click the Group No.: pull-down box to select the location to store the group. Note that the
Group No.: will automatically change to 0, (first group not used).
5. Enter a title for the new group in the Description: box.
6. Click OK. The Group Library dialog box appears with the group stored in the library.
7. Notice that any shape or bitmap libraries used to create the group object are listed for your
reference in the Including library box.
8. Click Close to return to the main screen of EasyBuilder.
9. From the File menu, click Save to permanently save the group to the library.
1010-1007W, Rev 06
When adding new group objects to existing group libraries that come with the
EZware-5000 software, remember that any future upgrade that you receive from Maple
Systems may overwrite existing libraries during installation. This will delete any new
group objects that you have entered. Therefore, we recommend that you create new
libraries to store these group objects or make backup files of the libraries before
installing new upgrades.
Sil ver Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
