Table of Contents
Advertisement
82
1. From the Tools menu, select Compress/Uncompress.... The Compressing dialog box
appears.
2. In the Compress frame box under Source Name, select the project (*.mtp) file that you wish
to compress. File must have a .mtp extension.
3. Click Compress... to begin. The utility will compress the project file and all related graphics
libraries into a single file.
To extract a compressed project file
1. From the Tools menu, select Compress/Uncompress.... The Compressing dialog box
appears.
2. In the Uncompress frame box under Source Name, select the project (*.cmp) file that you
wish to uncompress.
3. Click Uncompress... to begin. The utility will extract the project file and all graphics
libraries from the *.cmp file.
To exit EasyBuilder
On the File Menu, click Exit -- or click on the standard windows Close icon in the upper right corner.
Editing and Cre ating Screen Ob jects
This section shows how to manipulate graphics objects that are placed onto the work area of EasyBuilder. We will
use examples from sample projects that are included with the EasyBuilder software: HMI5043.MTP,
HMI5057.MTP, HMI5070.MTP, HMI5080.MTP, HMI5100.MTP, HMI5104.MTP, HMI5121.MTP and
HMI5150.MTP. Please load one of these project files and have EasyBuilder ready before you begin this section.
We will refer to Window_12 of the project. To display Window_12 on EasyBuilder, perform the following steps.
To open a window
1. On the Window Menu, click Open Window. The Open Window dialog box appears.
2. Click Window_12..
1010-1007W, Rev 06
Sil ver Se ries In stal la tion & Op er a tion Man ual
Advertisement
Table of Contents
