Rep re sent ing Data with Graphics Ob jects
The XY Plot Object
An XY Plot Object plots one series of values against another series of values.
To create an XY Plot Object:
1. Select Objects - XY Plot from the EZBuilder menu or select the XY plot icon from the parts
toolbar. The New XY Plot Object dialog appears.
\
2. Select the General tab.
• Description: Enter the text description or name for the object.
• Direction: Specify the direction of the plot:
• No of channels: Specify the number of datasets to display.
• In the Control Address section, set the PLC name of the PLC to read/write. Set the Device Type
and the Control Address. The Control Address field determines how the XY Plot operates:
Right - the origin is at the lower left. The X-axis moves to the right, the
colors Y-axis moves up.
Left
- the origin is at the lower right. The X-axis moves to the left, the
Y-axis moves up.
Up
-
the origin is at the lower left. The X-axis moves up, the Y-axis moves
to the right.
Down -
the origin is at the upper left. The X-axis moves down, the Y-axis
moves to the right.
224
1010-1007W, Rev 06