Table of Contents
Advertisement
Cre ating Your First Project
4. From the Edit menu, click Paste. A copy of the increment key appears in the upper left
corner of the work area. Deselect the increment key by clicking on any blank space in the
work area.
5. Double-click on the second increment key. The Set Word Object's Attribute dialog box
appears.
6. In the General tab section, change the Description to Decrement Button.
7. Click on the pull down box of the Mode Attribute: and select Press and hold decrement
(JOG—).
8. Enter 0 in the Attribute Bottom limit box.
9. Click the Shape tab.
10. Click Shape library. The Shape Library dialog box appears.
11. Scroll through the selections to selection 4. Click the shape, then click OK. The shape
should appear in the Shape tab.
12. Click OK.
47
1010-1007W, Rev 06
Advertisement
Table of Contents
