Fin Ishing Up - Maple Systems Silver Series Installation And Operation Manual

Operator interface terminal
Hide thumbs Also See for Silver Series:
Table of Contents

Advertisement

Cre ating Your First Project
19. Click on the Profile tab.
20. Enter 47 for the X position. Enter 168 for the Y position.
21. Enter 62 for the Width. Enter 49 for the Height.
22. Click OK.
23. On the main screen of EasyBuilder, you will see the function key that you just created move
and/or change size. This function key is used to display Window #11.
To create a second function key on Window#10
1. We could create the second function key by repeating the steps for the first function key.
Instead, however, we will take advantage of the first function key and copy it.
2. Click the first function key to highlight it.
3. From the Edit menu, click Copy.
4. From the Edit menu, click Paste. A copy of the function key appears in the upper left corner
of the work area. Deselect the function key by clicking on any blank space in the work area.
5. Double-click on the second function key. The Function Key's Object Attribute dialog box
appears.
6. In the General tab section, change the Description to Off Button.
7. Click on Close Window. Enter 10 for Window number
8. Click on the Label tab. Type OFF in the Content box.
9. Click on the Profile tab.
10. Enter 196 for the X position. Enter 168 for the Y position.
11. Click OK.
12. On the main screen of EasyBuilder, you will see the second function key that you just created
move to the lower right hand side of the work area. This function key is used to close
Window #11.
You have finished configuring your first window. It will look similar to the picture below:
You have now done your part in creating this sample project. It is now time for EZware -5000 to do its part.

Fin ishing Up

There are still a few steps, which must be completed before you can test your first project. In this section, you will:
• save the project onto your computer hard drive
• compile the project into a format that can be understood by the OIT
• download the project to the OIT
• verify that the OIT operates as expected
• exit the EZware-5000 software
55
1010-1007W, Rev 06

Advertisement

Table of Contents
loading

Related Products for Maple Systems Silver Series

This manual is also suitable for:

Hm15070thHm15100t

Table of Contents