Rep re sent ing Data with Graphic Ob jects
Profile tab:
The profile tab only appears after the object has been created. It can be used to change the location of the object on
the screen or the size.
Position frame:
use these settings to adjust the location of the object on the OIT screen (with reference to the upper left corner of the
object). Note that you can also simply click and drag the object to a new location as well.
Pinned: when checked, this feature prevents the programmer from accidentally moving the object on the OIT
screen using the 'click and drag' feature of the mouse.
X: the horizontal coordinate of the object
Y: the vertical coordinate of the object
Size frame:
use to adjust the height and width of the object (in pixels). Note that you can also resize the object by clicking once
on the object. This will display eight perimeter squares which you can then click and drag to resize the object.
Width: total width of the object
Height: total height of the object.
180
1010-1007W, Rev 06