Bosch DS7200V2-EXP Installation Manual page 113

DS7200V2-EXP | Installation Guide | 4. Reference Materials
Table 40: Control Panel Events and Reporting Formats (continued)
Event Event as shown
in Control Panel
Log
74* Duress
75 Fire,Alarm
76 Fire,Cross
77 Fire,Un-verified
78 Fire, Missing
79 Fire,Alrm,Rstl
80 Fire,Trouble
81 Fire,Trbl,Rstl
82 Instl Mode,Start
83 Instl Mode,End
84 Log Overflow
85 Log Threshold
86 AltCom Low Signl
* This event reports a user number + 200 when sent using SIA and Contact reporting formats.
** See the DS7200V2 Expert Programming Guide (P/N: 4998153891) for information on [Q] button programming.
Bosch Security Systems, Inc. | 04/12 | F01U253045-02
SIA Report Contact ID
Report
HA Hold Up 121 Duress
Alarm
FA Fire Alarm 110 Fire
FM Fire Alarm 110 Fire
Cross Zone
FG Unverified 378 Cross-
Event-Fire zone Trouble
FY Missing Fire 373 Fire
Trouble Trouble
FH Fire Alarm 110 Fire
Restore
FT Fire Trouble 373 Fire
Trouble
FJ Fire Trouble 373 Fire
Restore Trouble
LB Local 466 Service
Program On Premises
LX Local 466 Service
Programming Off Premises
Ended
JO Log Overflow 624 Event Log
Overflow
JL Log 623 Event Log
Threshold
XL Low Received 350
Signal Strength Communicatio
n Trouble
Event Description
User entered Duress PIN or
pressed Panic key sequence or
[Q] button** on RF Keyfob. The
Duress report is sent in addition
to any other report that the
user's action would generate.
Alarm event on fire zone type.
Verified alarm event on fire zone
type with Cross Zone Option.
See "Zone Response Options" in
the DS7200V2 Expert
Programming Guide (P/N:
4998153891).
Unverified alarm event on fire
zone type with Cross Zone
Option. Or unverified event on
Fire Verify zone type.
Fire zone type assigned to zone
expander (wired or RF) not
responding to panel's status poll.
Restoral from alarm, Fire zone
types.
Fault (Trouble) condition on Fire
zone types.
Restoral from Trouble, Fire zone
types.
Installer PIN entered. Installer
mode accessed.
Installer mode exited.
Panel log overflow condition.
Oldest events being overwritten.
Panel log reached threshold. See
"Log Supervision Configuration"
in the DS7200V2 Expert
Programming Guide.
Low Signal Strength detected on
Alternate Communication device.
EN | 113
Zone Types RPS
Linked to Event
Event Group
1
1- Fire 2
2- Fire with
Alarm
Verification
1- Fire 2
1- Fire 5
2- Fire with
Alarm
Verification
1- Fire 5
2- Fire with
Alarm
Verification
1- Fire 7
2- Fire with
Alarm
Verification
1- Fire 5
2- Fire with
Alarm
Verification
1- Fire 7
2- Fire with
Alarm
Verification
11
11
12
12
12
Status
Report
R
R
R
R
R S