Table of Contents
Advertisement
• Press
• Confirm your selection with
• Using
Caution:
You can ascribe all your buttons accordingly. Remember that the
standard solution has only 3 inputs.
Return to weighing:
See 11.3.
20.2. Configuration of outputs
Users can configure outputs according to their needs.
You can declare outputs:
MIN
OK
MAX
STABLE
THRESH 1
THRESH 2
CHUTE
Procedure:
• To declare an output number connected with the function,
enter <P8.2 OUTPUT CONF.> and then:
• Press
:
go to the next parameter.
Mass below the Min threshold
Mass between Min and Max threshold
Mass over the Max threshold
Stable result over the LO threshold
Threshold of passing from dosing to precise
dosing in dosing mode
Completing dosing process
Chute control
, you will see <P8.2.1 MIN>,
,
- 84 -
Advertisement
Table of Contents
