Correction Mode; Initial Correction Value - RADWAG WPW/E User Manual

24.8.6.1. Correction mode

Procedure:
• Enter <P7 WORK MODES> and then:
NONE
CONSTAN
T
AUTO
Return to weighing:
See 11.3.

24.8.6.2. Initial correction value

In parameter <P7.4.6.2 START CORRECTION> a user can set a
mass value to be subtracted from or added to the nominal mass.
Procedure:
• Enter <P7 WORK MODES> and then:
- Correction function disabled
- Dosing refered to a constant nominal value of
correction
- enabling automatic correction
- 114 -