General Purpose Variables In Printouts; Atabase Of Materials - RADWAG WPW/E User Manual

18.11.2. General purpose variables in printouts

The database of general purpose variables can comprise up to 100
records. Each record can hold up to 320 characters. Each variable
has prescribed a code number formatted as% XXX or
% XXX - inserting to the printer buffer a dedicated variable, where:
XXX – is between 801 to 900, which is equivalent to
subsequent records in the database (e.g. code 802 is
equivalent to the 2nd position in the database).
XXX YY - inserting to the printer buffer a dedicated variable, where YY
is a declared quantity of characters from a variable XXX.
Example:
„RADWAG"
Date:
Time:
Mass:
signature:.........
Where: <„RADWAG"> is a universal variable No 3. After entering non-
standard printouts (see 17.5) we design a printout:
% 8 0 3 \ C \ T D A T E : % 0 0 2 \ C \ T T I M E : % 0 0 3 \ C \ T M
A S S : % 0 0 0 \ C \ C \ T \ T S I G N A T U R E: . . . . . . . . . \ C \ 0
18.12. Database of materials
The database of materials can comprise 500 records.
Procedure:
• Enter databases according to 18.5 of this manual:
- 77 -
XXX YY: