Table of Contents
Advertisement
22.5. Backlight
According to the requirements (e.g. intensity of external light)
it is possible to:
• Switch on/off or set the backlight operation to AUTO – when
supplied from mains,
• Change the backlight intensity in the scale of 0% to 100% - when
supplied from an accumulator (lower backlight intensity increases
the operation time when supplied from the accumulator).
22.5.1. Backlight – power supply from mains
Procedure:
• Enter <P9 OTHER> according to 11.2. and then:
NO
YES
AUTO
Return to weighing:
See 11.3.
-
backlight switched off
-
backlight switched on
-
backlight switched off automatically
- 92 -
Advertisement
Table of Contents
