Table of Contents
Advertisement
NO
YES - Autozero enabled
Return to weighing:
See 11.3.
14. PORTS PARAMETERS
It is possible to connect external devices (printer, computer) to the ports:
• RS 232 (1)
• RS 232 (2)
• RS 485
• Ethernet
Configuration can be done in: <P2 COM PORTS PARAMETERS>.
14.1. RS 232, RS 485 setting
For setting: RS 232, RS 485 use following parameters:
• Baud rate
• Data bits
• Stop bit
• Parity
Caution:
There is impossible to set data bits and stop bits for RS 232(2).
They are internally set to 8 bits and 1 stop bit.
14.1.1. Baud rate of RS 232
Procedure:
• Enter <P1 SCALE PARAMETERS> according
to 11.2. and then:
- Autozero disabled
- 2400 - 115200 bit / s
- 7, 8
- 1, 1.5, 2
- NONE, ODD, EVEN
- 33 -
Advertisement
Table of Contents
