Table of Contents
Advertisement
Caution:
In parameters <P2 COM PORTS PARAMETERS> set the baud rate
for the one that requires the barcode scanner (default 9600b/s).
15.4.1. Selecting of communication port
In parameters <P3.4 TRANSP. CARD READER.> and then select
a communication port with the transponder card reader:
Return to weighing
See 11.3.
15.4.2. Procedure of ascribing card numbers to operators
In order to log in using a transponder card you need to have it previously
ascribed to a specific operator.
Procedure:
• Connect a transponder card reader to RS232/RS485 on the back
wall of the terminal,
• Select a communication port (see 15.4.1),
- 47 -
Advertisement
Table of Contents
