Ftp/Tftp Troubleshooting - Edge-Core ES4624-SFP Manual

PC side:
Start the FTP server software on the PC and set the username "Switch", and the
password "Admin".
ES4624-SFP/ES4626-SFP switch:
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#dir ftp: //Switch: Admin@10.1.1.1
220 Serv-U FTP-Server v2.5 build 6 for WinSock ready...
331 User name okay, need password.
230 User logged in, proceed.
200 PORT Command successful.
150 Opening ASCII mode data connection for /bin/ls.
recv total = 480
nos.img
nos.rom
parsecommandline.cpp
position.doc
qmdict.zip
shell maintenance statistics.xls
... (some display omitted here)
show.txt
snmp.TXT
226 Transfer complete.
Switch (Config)#

2.5.5 FTP/TFTP Troubleshooting

2.5.5.1 FTP Troubleshooting
When upload/download system file with FTP protocol, the connectivity of the link
must be ensured, i.e., use the "Ping" command to verify the connectivity between the
FTP client and server before running the FTP program. If ping fails, you will need to
check for appropriate troubleshooting information to recover the link connectivity.
The following is what the message displays when files are successfully transferred.
Otherwise, please verify link connectivity and retry "copy" command again.
220 Serv-U FTP-Server v2.5 build 6 for WinSock ready...
104