Debug Ip Mac Count; Debug Ip Arp Count - Edge-Core ES4624-SFP Manual

dynamic nd and the number of nd on the port is larger than the max number allowed,
users will see debug information." no debug switchport nd count" command is used to
disable the number limitation function debug of nd on the port.
Parameters：None
Command Mode：Admin Mode
Default Settings：None
Usage Guide：Display the debug information of the number of dynamic nd on the port
Examples：
Switch#debug switchport arp count
%Jun 14 16:04:40 2007 Current neighbor count 21 is more than or equal to the maximum
limit in port Ethernet3/1
!!%Jun 14 16:04:40 2007 Neighbor learning will be stopped and some mac will be
delete !!

24.3.14 debug ip mac count

Command：debug ip mac count
no debug ip mac count
Function：When the number limitation function debug of mac in the VLAN, if the number
of dynamic mac and the number of mac in the VLAN is larger than the max number
allowed, users will see debug information." no debug ip mac count" command is used to
disable the number limitation function debug of mac in the VLAN.
Parameters：None
Command Mode：Admin Mode
Default Settings：None
Usage Guide： Display the debug information of the number of dynamic mac in the VLAN.
Examples：
Switch#debug ip mac count
%Jun 14 16:04:40 2007 Current mac count 21 is more than or equal to the maximum
limit in vlan 1!!
%Jun 14 16:04:40 2007 Mac learning will be stopped and some mac will be delete !!

24.3.15 debug ip arp count

Command：debug ip arp count
no debug ip arp count
Function：When the number limitation function debug of arp in the VLAN, if the number
of dynamic arp and the number of arp in the VLAN is larger than the max number allowed,
893