Mbgp4; Mbgp4+ Introduction; Mbgp4+ Configures Mission List; Mbgp4+ Examples - Edge-Core ES4624-SFP Manual

17.9 MBGP4+

17.9.1 MBGP4+ Introduction

MBGP4+ is multi-protocol BGP (Multi-protocol Border Gateway Protocol) extension
to IPv6, referring to BGP protocol chapter about BGP protocol introduction in this manual.
Different from RIPng and OSPFv3, BGP has no corresponging independent protocol for
IPv6, instead,it takes extensions to address families on the original BGP. The extensions
to BGP by MBGP4+ are mostly embodied:
a. neighbor address configured can be IPv6 address;
b. Increase IPv6 unicast address family configuration.

17.9.2 MBGP4+ Configures Mission List

1. Configure IPv6 neighbor
2．Configure and enable IPv6 address family
3. Configure IPv6 neighbor
Command
BGP Protocol Configuration Mode
neighbor <X:X::X:X>
<as-id>
4. Configure and activate IPv6 address family
Command
BGP Protocol Configuration Mode
address-family IPv6 unicast
BGP protocol
comfiguration mode
（no）neighbor <X:X::X:X> activate
exit-address-family

17.9.3 MBGP4+ Examples

Explanation
remote-as
Configure IPv6 neighbor
Explanation
Enter IPv6 unicast address family
address family
Configure IPv6 neighbor to activate/inactivate
the address family
Exit address family configuration mode
634